Heavy Duty Production

FP160UC

FP160

FP165UC

FP165

FP170UC

FP170

FP175UC

FP175

King1200

King crimper 1200

Model FP160 FP165 FP170 FP175 King crimper 1200
Crimping range (mm) 1 10 — 202 10 — 202 10 — 320 10 — 320 200 — 650
Crimping range (inches) 1 0.39 — 7.95 0.39 — 7.95 0.39 — 12.60 0.39 — 12.60 7.87 — 25.60
Crimping force (kN) 3500 5000 6600 8300 12 000
Crimping force (tonnage) 350 500 660 830 1200
Crimpings / hour 2 1800 1260 1160 1140 NA
Max. hose size (inches) 6 6 10 10 16
Die set 3 P329 / FP160 P329 / FP160 P329 / FP1609 / FP170 P329 / FP1609 / FP170 P329 / FP1609 / FP170
Maximum opening (mm) 4 +125 +125 +155 +155 +180
Master die (D / L mm) 220 / 116 220 / 116 320 / 220 320 / 220 640 / 300
Master die (D / L inches) 8.66 / 4.57 8.66 / 4.57 12.60 / 8.66 12.60 / 8.66 25.20 / 11.8
Control UC UC UC UC UC
Motor (kW) 5.5 5.5 7.5 11 11
Motor (HP) 7.5 7.5 10.0 15.0 15.0
QC tool 14 X X — — —
Foot pedal 15 X X X X O
Control unit: integrated — — — — —
Control unit: C1 X X O O O
Control unit: C2 O O X X X
Back stop device: mechanic O O — — —
Back stop device: electric 15 X X — — —
Mirror X X — — —
UC1 O O O O O
UC2 O O O O O
UC3 O O O O O
Auto greasing G3 16 O O O O O
Oil cooler O O O O —
Remotic control unit O O O O X
Counter 18 X X X X X
ASCII signal O O O O O
Length (mm) 940 / 600 1060 / 600 1200 / 600 1200 / 640 3015 / 706
Width (mm) 860 / 1056 860 / 1056 936 / 1056 936 / 1156 1345 / 1197
Height (mm) 1780 / 1185 1825 / 1185 2080 / 1185 2080 / 1185 2291 / 1141
Length (inches) 37 / 23.7 71.8 / 23.7 47.3 / 23.7 47.3 / 25.2 118.7 / 27.8
Width (inches) 33.9 / 41.6 33.9 / 41.6 36.9 / 41.6 36.9 / 45.5 53 / 47.1
Height (inches) 71.9 / 46.7 71.9 / 46.7 81.9 / 46.7 81.9 / 46.7 90.2 / 44.9
Weight (kg) 2000 / 182 2460 / 182 4280 / 310 4400 / 350 12300 / 350
Weight (lbs) 4409 / 402 5423 / 402 9436 / 684 9700 / 772 27116 / 772

X = standard
O = optional
— = not available

  1. With standard dies. Crimping range can be increased with special dies.
  2. Theoretical with ½ hose, diameter 10 mm.
  3. See table for die set data.
  4. Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
  5. 12V / 24V. Overload controlled.
  6. 1-phase / 3-phase.
  7. FP140 dies can be used without adapter dies.
  8. Hydraulic hose / industrial hose.
  9. With adapter dies.
  10. Hose cutter.
  11. Full cycle.
  12. Die travel / feeding channel.
  13. NC20, NC30 and NC40 dies can be used.
  14. Available for P20, P32 and CC22 dies.
  15. Not available in MS control.
  16. Technical implementation varies depending on the machine model. Please verify the suitability of the option from your distributor.
  17. Available in UC models only.
  18. Standard feature in UC models, includes ascending/descending counter.